Cotton Candy Machine | Print |
Cotton Candy Machine Instructions


 Cotton Candy Machine Instructions



  1. Make sure motor is positioned in the center of the cart and switches are facing the opening.
  2. Plug the machine into a standard electrical outlet.
  3. Fill center of machine with approximately one cup or less of sugar.
  4. Moisten Whirl Grip (mesh screen) with a damp sponge. This process allows thefloss to adhere to the side of the floss bowl.
  5. Turn the motor switch ON and turn the heat switch to MEDIUM.
  6. Dampen cone slightly and twirl cone approximately 1 inch away from Whirl Grip. Do not stop twirling until machine is turned off. WARNING: Do not put hand close to the center of the machine while operating.
  7. Work floss away from the center of machine. You may make several servings, approximately up to 10 at a time, but will have to stop to allow the machine to cool to prevent the sugar from burning.
  8. Once you have made the servings, you MUST TURN OFF THE HEAT SWITCH FIRST. This step is crucial to prevent sugar from clogging and burning.
  9. Allow machine to cool for a few minutes.
  10. When you are ready to make more servings, repeat Steps 5-9.
  11. When finished, TURN OFF HEAT SWITCH FIRST. 
  12. When cool, turn OFF the motor switch.


Cleaning - Please do not attempt to clean this machine as problems may occur.